Product menu


News Videos Contact us Search Hydraulic Calculations CD25 Cylinder Drawing

Hydraulics, Pneumatics, Sliding Bearings, Window wipers, Test equipment etc.

Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-1

Vane pums series VMQ1

The pumps are available as single, double or triple pumps and single pumps with through-axle. Interchangeable inserts makes the pump very flexible with respect to the choice of fluid flow. Double and triple pumps, see information on VMQ2 + VMQ3.

  1. Max. working pressure 290 bar.
  2. Easily change direction of rotation.
  3. Low noise
  4. Multiple axle types: V / splines - SAE / ISO.
  5. The ports can be placed in different positions relative to each other by 90 degrees step.
  6. Metric 4-bolt flanges (ISO 6162).
  7. The default maximum speed is 1800 rev/min.
Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-6

Vane pumps series VMQ2 + VMQ3

The pumps are available as single, double or triple pumps and single pumps with through-axle. Interchangeable inserts makes the pump very flexible with respect to the choice of fluid flow. Single pumps, see information on VMQ1.

  1. Max. working pressure 290 bar.
  2. Easily change direction of rotation.
  3. Low noise
  4. Multiple axle types: V / splines - SAE / ISO.
  5. The ports can be placed in different positions relative to each other by 90 degrees step.
  6. Metric 4-bolt flanges (ISO 6162.
  7. The default maximum speed is 1800 rev/min.
Klikk på logo - kom direkte til leverandørens hjemmeside 126001-1-5

Gerolermotorer Series 2000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with 4-bolt flange, G 1/2 "connections and 32mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

  1. Deplacement 80-490 cm3/rev.
  2. Torque up to 900 Nm
  3. Speed ??up to 920 revs. / Min.
  4. Maximum inlet pressure 310 bar
  5. Allowed return pressure without drain 140 bar
  6. Recommended purity ISO 18/13
  7. Optimum viscosity 24-43 cSt
  8. Two speed motors available
  9. Valves flanges are available
Klikk på logo - kom direkte til leverandørens hjemmeside 126001-1-6

Gerolermotorer Series 4000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE-C 4-bolt flange, G 3/4 "connections and 40mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

  1. Fortrengningsvolum 110 - 625 cm3/omdr.
  2. Vrimoment opp til 1800 Nm
  3. Turtall opp til 860 omdr./min.
  4. Maks innløpstrykk 310 bar
  5. Tillatt returtrykk uten drenering 105 bar
  6. Anbefalt renhetsgrad ISO 18/13
  7. Optimal viskositetsområde 24-43 cSt
  8. Ventiler for flensmontasje er tilgjengelig
Klikk på logo - kom direkte til leverandørens hjemmeside 126001-1-7

Gerolermotorer Series 6000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE CC 4-bolt flange, G 1 "connections and 40mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

  1. Deplacement 195-985 cm3/rev.
  2. Torque up to 1885 Nm
  3. Speed ??up to 860 revs. / Min.
  4. Maximum inlet pressure 310 bar
  5. Allowed return pressure without drain 105 bar
  6. Recommended purity ISO 18/13
  7. Optimum viscosity 24-43 cSt
Klikk på logo - kom direkte til leverandørens hjemmeside 126001-1-8

Gerolermotorer Series 10000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE CC 4-bolt flange, SAE 1 1/4 "connections and 2 1/4" tapered shaft, SAE J501 Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

  1. Deplacement 345-940 cm3/rev.
  2. Vrioment up to 2700 Nm
  3. Speed ??up to 780 revs. / Min.
  4. Maximum inlet pressure 275 bar
  5. Allowed return pressure without drain 20 bar
  6. Recommended purity ISO 18/13
  7. Optimum viscosity 24-43 cSt
  8. Two speed motors available
  9. Valves flanges available
Klikk på logo - kom direkte til leverandørens hjemmeside 126001-2-1

Gerolermotorer Series 4000 Compact

Char-Lynn high torque low speed motors in the "compact" version. Same description as provided satndard 4000 but with size as a 2000 engine

  1. Deplacement 160-490 cm3/rev.
  2. Allowed return pressure without drain 140 bar
  3. Recommended purity ISO 18/13
  4. Optimum viscosity 24-43 cSt
  5. Two speed motors available
  6. Valves flanges are available
Klikk på logo - kom direkte til leverandørens hjemmeside 131004-2-2

Proportional valve series 660

Proportional valve type D66x is available in sizes NG 10 to NG 32

  1. Flow up to 1500 l / min at 10 bar pressure drop.
  2. NG10 NG25 deliver to Exd
Klikk på logo - kom direkte til leverandørens hjemmeside

Multi-handy 2040 og 2045

Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-3

Multi-handy 2020

A reasonable measuring device where you can store test results and later transfer it to a computer for further review.

  1. 2 analog inputs, 0-20 mA or 4-20 mA
  2. Automatic calculation of the difference between the measurement channels
  3. 12 bit A / D converter
  4. 128 KB of storage memory
  5. USB interface
  6. Supplied as a complete set of pressure sensors and Minimess ® tubing
Klikk på logo - kom direkte til leverandørens hjemmeside 135001-1-1

Cartridge Valves, Directional and Pressure Function

  1. ISO 7368 sizes 16 to 100
  2. Max pressure 420 bar
  3. 10 000 l / min at 5.0 bar pressure drop
  4. Pressure Valve
  5. Directional Valve
  6. Check valve
  7. Compensator up to NG50
  8. Flow Control Valves
Klikk på logo - kom direkte til leverandørens hjemmeside 140001-1-1

Hydraulic standard cylinders, CD25

Servi Cylinderservice has a standard range of hydraulic cylinders.Our CD25-cylinder is type approved by DnV for pressure up to 250 bar depending on strokes. This is a further development and improvement of the old CD20-cylinder. You can design a CD25 using our drawing generator on the Internet - www.servi.no

Klikk på logo - kom direkte til leverandørens hjemmeside 131009-2-1

Proportional section valve, with pressure compensated flow, type HSV 600

PMC Hydranor Section Valve system is a load sensing proportional valve system, which consist of flexible numbers of sections to match customer’s particular need. HSV-600 is special designed for marine surroundings for applications where one or several functions are connected to the same pump unit. HSV-600 to be used for control a wide range of hydraulic equipment, typically cranes, winch systems, drilling equipment etc.

  1. Manual and/or hydraulic remote
  2. Manual and electro proportional
  3. Electro-hydraulic proportional remote
  4. Pressure compensated flow control
  5. Load sensing by each section, dp up to 30 bar
  6. flow up to 600 l/min, can be asymetric
Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-8

Multi EPC 100 and EPC Multi 200 (DESINA version)

Robust pressure switches for industrial use. Available with one or two contact pairs. Programmable with optional setpoints, hysteresis or window function. Available in the following pressure ranges:

  1. 0 til 25 bar.
  2. 0 til 100 bar
  3. 0 til 250 bar
  4. 0 til 400 bar
Klikk på logo - kom direkte til leverandørens hjemmeside 180001-1-3

SERVI PAC - Standard range, pressure 250 bar

The piston accumulators are used in applications for shock absorption, braking systems, energy storage, backup power and volume compensation.

  1. CE- approved as per PED 97/23/EC
  2. Working pressure 250 bar
  3. Sizes from 1 to 400 litres
  4. ø80 to ø360 mm
  5. Easy to connect gasbottles
  6. Piston indicators can be fitted
Klikk på logo - kom direkte til leverandørens hjemmeside 158012-1-3

MINIMESS direct connecting for the 1620 series pressure sensors

Hydro Technik is the original manufacturer of the leak-free test points, MINIMESS ®, test points for oil and gas. MINIMESS ® test points allow you to connect and disconnect under pressure, without having to shut down the system. MINIMESS ® hoses are ideal for pressure measurements via pressure gauge or pressure sensor, venting of systems or to take oil samples from the plant.

610110-1-1

Testing of fresh concrete / Prøving av fersk betong i henhold til NS EN 12350


Slump cone and tamping rod to determine the consistency of fresh concrete in accordance to NS EN 12350-2.
Flow table to determine the workability of concrete in accordance to NS EN 12350-5.
Air entrainment meter to determine the air content in fresh concrete in accordance to NS EN 12350-7.


Slumpkjegle og stikkstang for bestemmelse av betongens konsistens i henhold til NS EN 12350-2.
Fallbord meg kjegle og stamper for bestemmelse av konsistens i henhold til NS EN 12350-5.
Luftporemåler for bestemmelse av luftinnhold i henhold til NS EN 12350-7.

610110-1-5


Making and curing of specimens for strength tests

Steel moulds :
Steel cube, cylinder and beam moulds for moulding of test specimens of concrete according to NS EN 12390-1, 5.1 and 5.2 and NS-EN 12390-2.
Calibrated moulds in accordance with section 5.2 is also available on request.

Vibration table :
Used for the compaction of concrete test specimens for strength tests
Available in different sizes

Curing tanks :
In stainless steel supplied complete with heating element with digital thermostat.
Inside dimension 1000 x 650 x 450 mm



Prøveformer i stål :
For støping av kuber, sylindre og bjelker i henhold til norsk standard NS EN 12390-1, 5.1 and 5.2 and NS-EN 12390-2.
Kalibrerte støpeformer for kuber (1-roms) i henhold til norsk standard NS EN 12390-1, kapitel 5.2 kan også leveres etter forespørsel.

Vibrasjonsbord
For komprimering av betongprøvene.
Flere størrelser og utførelser leveres..

Herdekar :
I rustfritt stål, leveres komplett med digitalstyrt varmeelement.
Innvendige

Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-8

Vane pumps, medium pressure series VQH

VQH series compared to previous VQ/-20 design series upgraded cartridgekit pump housing and high-strength cast iron.

  1. The result is higher peak pressure and improved volumetric efficiency.
  2. Installation dimensions are identical to the VQ / - 20 design and cartridge kits are also interchangeable.
  3. VQH series consists of fixed wing single and double pumps.
  4. Dual pump pressure values in blank table, see the individual pumps.
  5. Also available with through-axle.
Klikk på logo - kom direkte til leverandørens hjemmeside 124001-3-1

Fixed displacement motors for open and closed loop applications.

Axial piston motor in swashplate design for high pressure open and closed loop systems. Optimized starting and low speed behaviour.

  1. Steady low speed
  2. High starting torque
  3. Compact design
  4. High power density
  5. High reliability
  6. Long service life
Klikk på logo - kom direkte til leverandørens hjemmeside 114004-3-2

Transmission Pumps Series TVW

Axial pumps in swash plate design for closed circuit. Comes in many varieties, with a large selection of controls.

  1. Max pressure 420 bar
  2. Maximum working pressure 350 bar
  3. Displacement from 130 to 750 cm3/rev.
  4. Heavy duty shaft and bearing for long life
  5. Available in tandem design
  6. Complete valve equipment for closed circuit
  7. Press Filters on the feed circuit
  8. Wide range of pump controllers from simple hydraulic to digital PPQ regulators
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-1-1

Variable displacement axial piston pumps

Axial piston pumps, series PVQ, are quiet pumps for industrial applications

  1. Max pressure 210 bar
  2. Deplasement from 10.5 to 45 cm3/omdr.
  3. Available with through-axle
  4. Can be used with alternative fluids
  5. Special patented "timing" arrangement for the reduction of pressure peakes/noise
  6. UNF Connection, and alternative metric thread
  7. Continuous speed 1800 rpm.
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-3-2

Variable displacement axial piston pumps series 420 & 620

X20 series (420 & 620) are produced to meet increasing demands for compactness and increased power per. cm3 displacement.

  1. Maximum working pressure 280 bar
  2. Max pressure 320 bar intermitent
  3. Maximum peak pressure 350 bar.
  4. Light weight due to cost-effective construction
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-1-3

Variable axial piston pump, series of PVM

Variable displacement axial piston pumps for open circuit. A wide range of controls allows the pump can be adapted to many applications. The pumps have high efficiency, which means that the need for cooling is reduced.

  1. Max pressure 320 bar
  2. Maximum working pressure 280 bar
  3. Displacement from 18 to 141 cm3/rev.
  4. Low noise level and only 4% pressure pulsations
  5. Compact, space-saving pumps
  6. Standard with a maximum stroke limit
  7. Powerful bearings - long life
  8. Press Measuring point on the P-port
  9. Supplied with alternative pressure / flow control
  10. Suction port: SAE 3000 PSI and Pressure port: SAE 6000 PSI
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-3-1

Variable axial piston type Medium Duty (outbound series)

70000-series pumps are designed for open circuit in both industrial and mobile applications. Comes with compensator of the type of maximum pressure limiting and load sensing compensator.

Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-2

Vane Pumps Series VQ Single Pump (Replaced by VQH)

Displacement 39-193 cm3/rpm - Vane pumps of "intra-vane" type for industrial and mobile applications.

  1. Maks. arbeidstrykk 210 bar
  2. Fleksible bi-metall sideplater gir optimale kaldstartegenskaper
  3. Innsatser utskiftbare med innsatser fra industriell vingepumpe serie "V"
  4. Omdr. tall maks. 2700 omdr./min.
  5. Tilkobling SAE 3000 flenser
  6. Kan leveres som dobbelpumpe og med gjennomgående aksel
  7. Max. working pressure 210 bar.
  8. Flexible bi-metal side panels for optimal cold start characteristics.
  9. Inserts with interchangeable inserts from industrial wing pump series "V".
  10. Speed max. 2700 rpm.
  11. Connection SAE 3000 flanges.
  12. Available as double pump and through-axle
Klikk på logo - kom direkte til leverandørens hjemmeside 124001-3-2

Variabel displacement motors for open and closed loop applications.

Axial piston motor in swashplate design for high pressure closed and open loop systems. Optimized starting and low speed behaviour.

  1. Jerk-free low speed
  2. High starting torque
  3. Large conversion range
  4. Zero angle possible
  5. Dynamic response
  6. PTO through-drive motor
  7. Compact design
  8. High power density
  9. High reliability
  10. Long service life
610110-1-6


Specimen grinding machines
-for grinding of specimens made of concrete,high-strength concrete, natural stone, screed, fire resistant products and asphalt.
-for grinding of specimens acc. to NS EN 12390-3 and NS EN 12504-1



Slipemaskin
-for plansliping av materialprøver i betong, høyfast betong, naturstein, ildfaste materialer og asfalt.
-for avretting slik at trykkflater blir planparallelle etter NS-EN 12390-3 og NS-EN 12504-1

Klikk på logo - kom direkte til leverandørens hjemmeside 114004-5-2

Transmisjonspumper serie TVW - PpQ


Eaton axial P / TVW series for open or closed circuit can be supplied with prop. alternatively servo valve for regulating power, pressure and flow (PPQ). The corresponding digital control card prepared for current, voltage or Profibus control signal.
Pump range comes with displacement 130/180/250/360/500 cc. Alternatively, as a double pump.
Max pressure 420 bar. Max RPM 1800.
(Mounting / front flange interchangeable with A4V)

  1. Max pressure 420 bar
  2. Maximum working pressure 350 bar
  3. Displacement from 130 to 750 cm3/rev.
  4. Heavy duty shaft and bearing for long life
  5. Available in tandem design
  6. Complete valve equipment for closed circuit
  7. Press Filters on the feed circuit
  8. Wide range of pump controllers from simple hydraulic to digital PPQ regulators
  9. Digital PPQ regulators
Klikk på logo - kom direkte til leverandørens hjemmeside 158012-1-4

MINIMESS 1620 measurement points for pressure sensors

Hydro Technik is the original manufacturer of the leak-free test points, MINIMESS ®, test points for oil and gas. MINIMESS ® test points allow you to connect and disconnect under pressure, without having to shut down the system. MINIMESS ® hoses are ideal for pressure measurements via pressure gauge or pressure sensor, venting of systems or to take oil samples from the plant.

Klikk på logo - kom direkte til leverandørens hjemmeside 180001-1-5

SERVI PAC - Standard range, pressure 350 bar

The piston accumulators are used in applications for shock absorption, braking systems, energy storage, backup power and volume compensation.

  1. CE- approved as per PED 97/23/EC
  2. Working pressure 350 bar
  3. Sizes from 0,2 to 220 litres
  4. ø50 to ø250 mm
  5. Easy to connect gasbottles
  6. Piston indicators can be fitted
Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-9

SEG 1060

Panel-mounted instrument, available in 24 VDC or 230 VAC version. Measures pressure, temperature, flow, RPM, etc. Possibility to store max and min values.

Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-5

Multi-System 3020

This instrument has in addition to two analog channels for pressure sensors, a frequency channel for the flow meter. The instrument is sutable for field work where you can store up to 14 logs, which can later be transferred to a PC and evaluated using the supplied software product.

  1. 2 analog inputs, 0-20 mA or 4-20 mA
  2. 1 frequency input
  3. 12 bit A / D converter
  4. USB interface
  5. Automatic detection sensor of the measuring sensor (ISDS)
  6. Available as a complete set of measuring the pressure sensors, flow meters and measuring cables
Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-6

Multi-System 3050

Top model in Multi-Handy range. With three analog inputs and a frequency input, opens the opportunities for advanced metering tasks.

  1. 3 analog inputs, 0-20 mA or 4-20 mA
  2. 1 frequency input
  3. 12 bit A / D converter
  4. Data transfer with USB or RS 232
  5. 900 kB storage memory
  6. User friendly menu driven
  7. ISDS
  8. Available as a complete set of pressure sensors, flow meters, measuring cables and software HYDROcomsys

Testing of hardened concrete to NS EN 12390-2

Curing tanks for concrete specimens.

  1. quipped with digital electronic controlled heater. Comes with a lid, grid of hardwoods and drain valve.
  2. Int. measure 83x52x40cm, ext. measurements 115x60x65cm
Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-7

Vane Pumps Series VQ Double Pump (Replaced by VQH)

Displacement 39-193 cm3/rev. Vane pumps of "intra-vane" type for industrial and mobile applications.

  1. Max. working pressure 210 bar.
  2. Flexible bi-metal side panels for optimal cold start characteristics.
  3. Inserts with interchangeable inserts from industrial wing pump series "V".
  4. Speed max. 2700 rev/min
  5. Connection SAE 3000 flanges.
  6. Available as a single pump, see information about the wing pump series VQ1.
Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-3

Vane Pumps Series V10 and V20

Displacement from 6.55 to 41.8 cm3/rev. Vane pumps for mobile and industrial applications.

  1. Max. working pressure 170 bar.
  2. V10 and V20 are wing pumps with fixed displacement.
  3. Balanced design minimizes bearing load.
  4. Silent operation.
  5. Can run on alternative fluids.
  6. Supplied as single and double pumps.
Klikk på logo - kom direkte til leverandørens hjemmeside 114004-3-1

Transmission Pumps TVX series

Variable axial piston pumps for closed systems.

  1. 20 bar max pressure
  2. 350 bar maximum working pressure
  3. Displacement from 66 to 180 cm3/rev.
  4. Heavy duty shaft and bearing for long life
  5. Available in tandem design
  6. Complete valve equipment for closed circuit
  7. Pressure Filters on the feed circuit
  8. Wide range of pump controllers from simple hydraulic to digital PPQ regulators
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-2-2

Variable axial pump, series K3VL45 - 60-80 cm3/rev.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  1. Max pressure 350 bar
  2. Continuous pressure 320 bar
  3. Max displacement adjustment as standard
  4. Wide range of regulators
  5. Controller for parallel execution of multiple pumps
Klikk på logo - kom direkte til leverandørens hjemmeside 158011-1-2

Multi-Panel 8050

Measuring instrument for 19 "rack mounting. With a total of up to 30 inputs, large, clear and easy to read displays, Multi-Panel 8050 ideal for measuring and monitoring of large systems. Available in versions with 8 or 16 displays.

  1. 10 analog inputs, 0-20 mA, 4-20 mA, 0-10 V, + / - 10V.
  2. 2 analog inputs + / - 2A DC and + / - 48V DC.
  3. 4 frequency inputs.
  4. 6 or 14 CAN bus inputs.
  5. 4 digital inputs.
  6. 4 digital outputs.
  7. 2 analog outputs.
  8. 128 MB RAM, expandable to 1 GB.
Klikk på logo - kom direkte til leverandørens hjemmeside 131009-3-3

Proportional load sensing directional valves series WCB-100/150 for winch control

Valve kit for direct mounting on the winch motor. Includes standard, among others, manual / el.prop operation, shock / antikavitasjon, hook top, load control, mooring, emergency stop and emergency lowering. For other options see the attached model code key.

  1. 12/24 VDC.
  2. Maximum oil flow 150 lpm
  3. Connection ¾ "- 1" - 1 ¼ "BSP.
  4. Available with ATEX for use in Zone I.
Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-4

Multi-System 5060

With six analog, dual frequency and up to 14 CAN bus signal inputs, this instrument solves the most demanding measurement tasks. The instrument has a color screen with the option for graphical display of measurement results.

  1. 6 analog inputs, 0-20 mA, 4-20 mA, 0-10V, 0.5 to 4.5 V, + / - 10V
  2. 2 frequency inputs
  3. 14 CAN bus signal inputs
  4. Trigger input and output
  5. 13 bit A / D converter
  6. 128 MB RAM, expandable to 1 GB SD chip
  7. Can store 200 logs
  8. 3.5-inch color display
Klikk på logo - kom direkte til leverandørens hjemmeside 131009-3-4

Proportional load sensing directional valves series WCB-300/500 for the winch control.

Valve kit for direct mounting on the winch motor. Includes standard manual / el.prop operation, shock / antikavitasjon, load control, mooring, emergency stop and emergency lowering

  1. 12/24 VDC.
  2. Maximum oil flow 300 lpm (500 lpm available 3-quarter 2010).
  3. Available with ATEX for use in Zone I.
Klikk på logo - kom direkte til leverandørens hjemmeside 132001-2-5

Load control valve cartridge serial MB 350 bar

-port load lowering valves for demanding applications with load sensing to control the movement of a load in the engine / cylinder by means of pilot pressure. Valves close a poppet, but regulates a Spool Valve. By varying back pressure select 4-port valve.

  1. Maximum load holding pressure 260 bar set pressure up to 350 bar
  2. Leakage 5 drops max / min.
  3. Valve sizes from 120 to 480 lpm
  4. Many choices of pilot ratio (1.5:1, 3:1, 4.5:1)
  5. Many choices with respect to the adjustment range of opening pressure
  6. 1.7 bar opening pressure of valve
  7. Hysteres less than 15%
Klikk på logo - kom direkte til leverandørens hjemmeside 158001-1-7

Multi-System 8050

Measuring instrument for the large tasks. Multi-System 8050 has twelve analog inputs, four frequency inputs up to 14 CAN bus signal inputs. The instrument also has four digital and two analog outputs that can be used to control machines or processes

  1. 10 analog inputs, 0-20 mA, 4-20 mA, 0-10 V, + / - 10V
  2. 2 analog inputs + / - 2A DC and + / - 48V DC
  3. 4 frequency inputs
  4. 6 or 14 CAN bus inputs
  5. 4 digital inputs
  6. 4 digital outputs
  7. 2 analog outputs
  8. 128 MB RAM, expandable to 1 GB
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-2-3

Variable axial piston pumps, series K3VL 140-200 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  1. ax pressure 350 bar
  2. Continuous pressure 320 bar
  3. Max displacement adjustment as standard
  4. Wide range of regulators
  5. Controller for parallel execution of multiple pumps
Klikk på logo - kom direkte til leverandørens hjemmeside 117001-1-4

Vane Pumps Series V (Replaced by VQH)

Displasement 39-193 cm3/rev. Vane Pumps of "intra-vane" type for industrial applications.

  1. 12 wings kit.
  2. Low noise.
  3. Removable inserts make the pump flexible.
  4. Speed, max. 1800 rev/min.
  5. Connection SAE 3000 flanges.
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-2-1

Variable axial piston pump, series K3VG

Pumps of Swash-plate design for open circuit. Available with different types of regulation.Also available as a "back to back" (DT), tandem pump with 360 cm3/omdr. or 500 cm3/omdr. Provides excellent speed characteristics, as well as the opportunity for sharing amount from the pump.

  1. Max pressure 400 bar
  2. Continuous pressure 350 bar
  3. Deplacement 180-560 m3/rev.
  4. Balanced spherical valve plate
  5. Hydrostatic balangsert bearing
  6. Max displacement adjustment as standard
  7. Wide range of regulators
  8. SAE 3000 PSI suction and SAE 6000 PSI pressure ports
  9. SAE 6000 samleflens available for DT pumps
Klikk på logo - kom direkte til leverandørens hjemmeside 180001-1-6

Piston accumulators,r serie HPS11 ø140, - ø160

  1. "Heavy Duty" ø140mm:
  2. 6-20 litres
  3. 250 bar
  4. 350 bar
  5. 415 bar
  6. "Heavy Duty" ø160mm:
  7. 5-30 litres
  8. 250 bar
  9. 350 bar
  10. 415 bar
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-4-3

Variable axial piston pump series V30E

V30E is a new generation of variable displacement axial piston pumps from Hawe-InLine.

  1. Max pressure 420 bar
  2. Continuous pressure 350 bar
  3. Displacement 98-270 cm3/rev.
  4. Compact design and light weight
  5. Very fast response time
  6. Quiet
  7. Comes with alternate pressure / flow control
  8. SAE 3000 PSI suction and SAE 6000 PSI pressure ports
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-5-1

Variable axial piston pump series HPR-02

High pressure axial piston pump in swash plate design for open loop systems.

  1. Excellent suction up to rated speed.
  2. Noise optimization over the entire range of operation.
  3. Compact design.
  4. High power density.
  5. High pressure rating.
  6. High reliability.
  7. Long working life.
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-1-4

Variable axial piston pumps, series of PVX

Pumps of Swash-plate design for open-circuit. Comes with many types of regulations, many designs, including continuous shaft for tandem installation.

  1. Max pressure 420 bar
  2. Continuous pressure 350 bar
  3. Displacement 66-250 cm3/rev.
  4. Powerful saving, long life
  5. High efficiency
  6. Low noise
  7. Connection pressure side SAE 6000, SAE 3000 suction side
Klikk på logo - kom direkte til leverandørens hjemmeside 132001-2-8

Load control valve cartridge range MW 350 bar

4-port load lowering valves for demanding applications with load transfer to control the movement of a load in the engine / cylinder by means of pilot pressure. The valve closes as a poppet, but governs as a Spool Valve. Valve spring chamber is drained to own drainport.

  1. Maximum load holding pressure 260 bar, with the set pressure up to 350 bar
  2. Leakage 5 drops max / min.
  3. Valve sizes from 120 to 480 lpm
  4. Many choices of pilot ratio (1.5:1, 3:1, 4.5:1)
  5. Many choices with respect to the adjustment range of opening pressure
  6. 1.7 bar opening pressure of valve
  7. Hysteresis less than 15%
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-1-5

Variable axial piston pumps series PVW

Pumps of Swash-plate design for open-circuit. Comes with many types of regulations, many designs, including continuous shaft for tandem installation.

  1. 420 bar max pressure
  2. 350 bar continuous pressure
  3. Displacemnet 250-750 cm3/rev.
  4. Powerful bearings for long life
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-2-4

Atex variable aksialstempelpumper serie K3VL45 - 60 - 80 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  1. Max pressure 350 bar
  2. Continuous pressure 320 bar
  3. Max displacement adjustment as standard
  4. Wide range of regulators
  5. Controller for parallel execution of multiple pumps
  6. Atex certified by Servi Group
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-2-5

Atex variable aksialstempelpumper serie K3VL 140 - 200 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  1. Max pressure 350 bar
  2. Continuous pressure 320 bar
  3. Max displacement adjustment as standard
  4. Wide range of regulators
  5. Controller for parallel execution of multiple pumps
  6. Atex certified by Servi Group
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-4-4

Atex variable axial piston pump series V30E

V30E is a new generation of variable displacement axial piston pumps from Hawe-InLine.

  1. Max pressure 420 bar
  2. Continuous pressure 350 bar
  3. Displacement 98-270 cm3/rev.
  4. Compact design and light weight
  5. Very fast response time
  6. Quiet
  7. Comes with alternate pressure / flow control
  8. SAE 3000 PSI suction and SAE 6000 PSI pressure ports
  9. Atex certified by Servi Group
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-4-1

Variable axial piston pumps series V60N

V60N is a variable displacement axial piston pumps for open circuit, designed for direct mounting on PTO, but is also available with SAE flange for standard installation.

  1. Max pressure 400 bar
  2. Working pressure 350 bar
  3. Displacement 90 and 110 cm3/rev.
  4. Very compact design
  5. Easy conversion to other rotation
Klikk på logo - kom direkte til leverandørens hjemmeside 114004-4-1

Transmission Pumps, Linde HPV-02 series

Axial pumps in swash plate design for closed circuit. Comes in many varieties, with a large selection of modular controls.

  1. Max operating pressure 420 bar
  2. Max peek pressure 500 bar
  3. Maximum continuous working pressure 250 bar delta P.
  4. Displacement from 55 to 280 cm3/rev.
  5. 21° swash angel design gives compact build size and log service life.
  6. Hydrostatic bearing compensate for axial forces.
  7. Available in tandem design
  8. Filters on the feed circuit
Klikk på logo - kom direkte til leverandørens hjemmeside 131004-2-4

Proportional valve 660 series ATEX

Propventil type D66x is available in sizes NG 10 to NG 32

  1. Flow up to 1500 l / min at 10 bar pressure drop.
  2. NG10 NG25 deliver to Exd
Klikk på logo - kom direkte til leverandørens hjemmeside 180001-1-8

Piston accumulators,r serie HPS11 ø180, - ø200

  1. "Heavy Duty" ø180mm:
  2. 8-50 litres
  3. 250 bar
  4. "Heavy Duty" ø200mm:
  5. 8-50 litres
  6. 250 bar
  7. 350 bar
  8. 415 bar
  9. (HPS11 med ø80 til og med ø160 er utgått)
Klikk på logo - kom direkte til leverandørens hjemmeside 190001-2-3

PMC Compact Units

with Kawasaki pressure compensated pumps.

  1. Pump Size 45 cc:
  2. Max pressure 350 bar
  3. Continuous pressure 320 bar
  4. Pump Size 60 cc:
  5. Max pressure 280 bar
  6. Continuous pressure 250 bar
  7. Tank volume 250 to 700 liters
Klikk på logo - kom direkte til leverandørens hjemmeside 190001-2-5

PMC Compact Units

with Kawasaki pressure compensated pumps.

  1. Pump sizes 200 and 280 cc
  2. Max pressure 350/400 bar
  3. Continuous pressure 320/350 bar
  4. Tank from 1000 to 2500 liters
610110-1-3

Zyklos rotating pan mixers/ laboratorieblandere for betong

Applications:
For all sorts of concrete: Selfcompacting and high performance concrete, mortar and plasters.
Maximum batch capacities from 30 ltr, to 500 ltr.


Bruksområder:
For alle typer betong: Selvkomprimerende, mørtler og sparkelmasser.
Maksimum blandekapasiteter fra 30 ltr. til 500 ltr.

  1. ZK 50 HE:
  2. Blandevolum ca 50 ltr. ut.
  3. Eksentrisk plassert blandestjerne, 1.5kW sammen med sideskraper gir en rask og effektiv blanding.
  4. Blandetrommel tiltes elektrisk, effekt 0.12kW.
  5. Trommel har egen elektrisk drift, 0.75kW.
  6. Blandeverktøy heves og senkes hydraulisk.
  7. Alle funksjoner betjenes over styrepanelet.
610110-1-4

Testing of fresh concrete NS EN 12350 Air content

Air entrainment meter for the determination of air enclosed in freshly mixed concrete .

  1. This is a robust measure that is easy to use.
  2. Volume 8 liters
  3. Includes calibration equipment and spray bottle
Klikk på logo - kom direkte til leverandørens hjemmeside 114001-3-1

Fixed piston pumps series SC12-108

Fixed axial type "bent axis" in sizes ranging from 12.6 to 108 cm3/omdr. Available in DIN or SAE design and can be directly mounted on the gear.

  1. Maximum working pressure 400 bar
  2. Powerful bearing
  3. Quiet pumps
  4. Available with by-pass valve
Klikk på logo - kom direkte til leverandørens hjemmeside 133032-2-1

Pressure relief valve

Standard or Ex-proof.

  1. Maximum oil flow 20 lpm (depending on the maximum pressure)
  2. Max pressure 315 bar
  3. Sizes NG 6
  4. EEx em II T4 = Ex design in 24 VDC
  5. IP 67 (Ex version) IP 54 (standard version)
Klikk på logo - kom direkte til leverandørens hjemmeside 114004-1-1

Transmission pumps Series Medium Duty

Varaible axial piston pumps for closed systems, supplied as single or double pumps.

  1. Up to 380 bar max pressure
  2. 210 bar maximum working pressure
  3. Displacement from 20.3 to 49.2 cm3/rev.
  4. Available with feed pump
  5. Integrated pressure relief valve
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-1-2

Variable axial piston pumps series of PVH (Outgoing series)

PVH pumps are axial piston pumps with small dimensions and low weight. They are both in mobile and industrial design.

  1. 315 bar max pressure
  2. 275 bar working pressure
  3. Displacement 57, 74, 98 and 131 cm3/rev.
  4. Available with maximum pressure compensator, load sensing compensator and "Torque-Limiter"
  5. Ability to mount Cetop 3 control valve directly on the pump
  6. The pumps are available with cylindrical or spline shaft, also in the general design
  7. Connection flange SAE 3000 PS
Klikk på logo - kom direkte til leverandørens hjemmeside 114002-4-2

InLine variable displacement axial piston pumps series V30D (Outgoing series)

Pumps of Swash-plate design for open circuit. Available with different types of regulation. Dual pumps available on request.

  1. Opp til 420 bar maks trykk
  2. Opp til 350 bar kontinuerlig trykk
  3. Fortregningsvolum 45-250 cm3/omdr.
  4. Up to 420 bar max pressure
  5. Up to 350 bar continuous pressure
  6. Deplacement 45-250 cm3/rev.

SERVI GROUP
Rasmus Solbergs vei 1
Postboks 3230
1400 Ski


T +47 64 97 97 97
F +47 64 97 98 99
post@servi.no