Product menu

Hydraulics

Aksial Stempel pumper

114001-4-1

DYNEX highpressure pumps for low viscosity fluid

High quality fixed desplacement checkball type piston pump. Extremely applicable for low viscosity fluid.

  • Also available in stainless steel.
  • Series PF1300 and PF4300
  • Max operating pressure 1040 bar
  • Specially designed for offshore and subsea applications.
  • Displacement 0,79 to19,33 cm3/rev.
  • Max speed 1.800 rpm.
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114001-3-1

Fixed piston pumps series SC12-108

Fixed axial type "bent axis" in sizes ranging from 12.6 to 108 cm3/omdr. Available in DIN or SAE design and can be directly mounted on the gear.

  • Maximum working pressure 400 bar
  • Powerful bearing
  • Quiet pumps
  • Available with by-pass valve
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114001-2-1

Fixed axial pump range PFX

Pumps of swach-plate design Available in several constructions also tandem.

  • 420 bar max pressure
  • 350 bar continuous pressure
  • Displacement 66-250 cm3/rev.
  • Powerful bearings-long life
  • High efficiency
  • Low noise
  • Connection pressure side SAE 6000, SAE 3000 on suction side
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114001-2-2

Fixed axial pump series PFW

Pumps of swash-plate design for heavy use and long life. Available in several designs also tandem.

  • 420 bar max pressure
  • 350 bar continuous pressure
  • Displacement 250-750 cm3/rev.
  • Powerful bearings-long life
  • High efficiency
  • Low noise
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-5-1

EATON DuraForce™ HPR

Self-regulating Pump for Open Loop Operation

  • Energy saving operation by “flow on demand” control
  • Clockwise or counter clockwise rotation
  • Self-priming at high nominal speed
  • Higher rotating speed by tank pressurization or swashangle reduction
  • Adaptive noise optimization SPU
  • Noise optimization over the entire range of operation
  • Dynamic response
  • Excellent suction up to rated speed
  • High pressure rating
  • High reliability
  • Long working life
  • Compact design
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-3-2

Variable displacement axial piston pumps series 420 & 620

X20 series (420 & 620) are produced to meet increasing demands for compactness and increased power per. cm3 displacement.

  • Maximum working pressure 280 bar
  • Max pressure 320 bar intermitent
  • Maximum peak pressure 350 bar.
  • Light weight due to cost-effective construction
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-1-3

Variable axial piston pump, series of PVM

Variable displacement axial piston pumps for open circuit. A wide range of controls allows the pump can be adapted to many applications. The pumps have high efficiency, which means that the need for cooling is reduced.

  • Max pressure 320 bar
  • Maximum working pressure 280 bar
  • Displacement from 18 to 141 cm3/rev.
  • Low noise level and only 4% pressure pulsations
  • Compact, space-saving pumps
  • Standard with a maximum stroke limit
  • Powerful bearings - long life
  • Press Measuring point on the P-port
  • Supplied with alternative pressure / flow control
  • Suction port: SAE 3000 PSI and Pressure port: SAE 6000 PSI
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-2-2

Variable axial pump, series K3VL45 - 60-80 cm3/rev.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  • Max pressure 350 bar
  • Continuous pressure 320 bar
  • Max displacement adjustment as standard
  • Wide range of regulators
  • Controller for parallel execution of multiple pumps
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-2-3

Variable axial piston pumps, series K3VL 140-200 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

  • Max pressure 350 bar
  • Continuous pressure 320 bar
  • Max displacement adjustment as standard
  • Wide range of regulators
  • Controller for parallel execution of multiple pumps
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-2-1

Variable axial piston pump, series K3VG

Pumps of Swash-plate design for open circuit. Available with different types of regulation. Also available as a "back to back" (DT), tandem pump with 360 cm3/omdr. or 500 cm3/omdr. Provides excellent speed characteristics, as well as the opportunity for sharing amount from the pump.

  • Max pressure 400 bar
  • Continuous pressure 350 bar
  • Deplacement 180-560 m3/rev.
  • Balanced spherical valve plate
  • Hydrostatic balangsert bearing
  • Max displacement adjustment as standard
  • Wide range of regulators
  • SAE 3000 PSI suction and SAE 6000 PSI pressure ports
  • SAE 6000 samleflens available for DT pumps
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-4-3

Variable axial piston pump series V30E

V30E is a new generation of variable displacement axial piston pumps from Hawe-InLine.

  • Max pressure 420 bar
  • Continuous pressure 350 bar
  • Displacement 98-270 cm3/rev.
  • Compact design and light weight
  • Very fast response time
  • Quiet
  • Comes with alternate pressure / flow control
  • SAE 3000 PSI suction and SAE 6000 PSI pressure ports
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-1-4

Variable axial piston pumps, series of PVX

Pumps of Swash-plate design for open-circuit. Comes with many types of regulations, many designs, including continuous shaft for tandem installation.

  • Max pressure 420 bar
  • Continuous pressure 350 bar
  • Displacement 66-250 cm3/rev.
  • Powerful saving, long life
  • High efficiency
  • Low noise
  • Connection pressure side SAE 6000, SAE 3000 suction side
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-1-5

Variable axial piston pumps series PVW

Pumps of Swash-plate design for open-circuit. Comes with many types of regulations, many designs, including continuous shaft for tandem installation.

  • 420 bar max pressure
  • 350 bar continuous pressure
  • Displacemnet 250-750 cm3/rev.
  • Powerful bearings for long life
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-4-1

Variable axial piston pumps series V60N

V60N is a variable displacement axial piston pumps for open circuit, designed for direct mounting on PTO, but is also available with SAE flange for standard installation.

  • Max pressure 400 bar
  • Working pressure 350 bar
  • Displacement 90 and 110 cm3/rev.
  • Very compact design
  • Easy conversion to other rotation
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-1-2

Variable axial piston pumps series of PVH (Outgoing series)

PVH pumps are axial piston pumps with small dimensions and low weight. They are both in mobile and industrial design.

  • 315 bar max pressure
  • 275 bar working pressure
  • Displacement 57, 74, 98 and 131 cm3/rev.
  • Available with maximum pressure compensator, load sensing compensator and "Torque-Limiter"
  • Ability to mount Cetop 3 control valve directly on the pump
  • The pumps are available with cylindrical or spline shaft, also in the general design
  • Connection flange SAE 3000 PS
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-4-2

InLine variable displacement axial piston pumps series V30D (Outgoing series)

Pumps of Swash-plate design for open circuit. Available with different types of regulation. Dual pumps available on request.

  • Opp til 420 bar maks trykk
  • Opp til 350 bar kontinuerlig trykk
  • Fortregningsvolum 45-250 cm3/omdr.
  • Up to 420 bar max pressure
  • Up to 350 bar continuous pressure
  • Deplacement 45-250 cm3/rev.
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-1-1

Variable displacement axial piston pumps

Axial piston pumps, series PVQ, are quiet pumps for industrial applications

  • Max pressure 210 bar
  • Deplasement from 10.5 to 45 cm3/omdr.
  • Available with through-axle
  • Can be used with alternative fluids
  • Special patented "timing" arrangement for the reduction of pressure peakes/noise
  • UNF Connection, and alternative metric thread
  • Continuous speed 1800 rpm.
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114002-3-1

Variable axial piston type Medium Duty (outbound series)

70000-series pumps are designed for open circuit in both industrial and mobile applications. Comes with compensator of the type of maximum pressure limiting and load sensing compensator.

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
114005-1-1

Parts axial piston pump series PVM

For each type of pump can be selected parts of the shaft and gasket set.

  • All shafts have name starting with SAE J744-
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
SERVI GROUP
Rasmus Solbergs vei 1
Postboks 3230
1400 Ski

T +47 64 97 97 97
F +47 64 97 98 99
post@servi.no

24/7 Service
T +47 64 97 97 00
Servi AS
BergenT +47 55 10 82 20
CCB-ÅgotnesT +47 934 56 607
KongsbergT +47 48 06 56 56
KristiansandT +47 38 10 22 90
RissaT +47 73 85 05 00
SkiT +47 64 97 97 97
TrondheimT +47 73 80 10 00
Servi Ulsteinvik AS
UlsteinvikT +47 70 31 85 50
ÅlesundT +47 96 91 96 01
 
Servi Hydraulik AB
GøteborgT +46 (0)31 745 00 62

Facebook LinkedIn Youtube