Product menu

Hydraulics

Measuring Devices

152502-1-1

Argo Hytos OPCom Portable Oil Lab


The OPCom Portable Oil Lab is a mobile oil laboratory for service, with which the oil cleanliness and the oil condition in hydraulic and lubrication systems can be measured quickly and easily.
The portable oil service device OPCom portable Oil Lab offers an intelligent and cost-efficient possibility for monitoring of your system and oil parameters.

Compatible fluids:

  • mineral oils (H, HL, HLP, HLPD, HVLP),
  • synthetic esters (HETG, HEPG, HEES, HEPR),
  • polyalkylenglycols (PAG),
  • zinc and ash-free oils (ZAF),
  • polyalphaolefins (PAO)
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
152502-2-1

Argo Hytos OPCom Particle Monitor


The OPCom Particle Monitor is a compact particle measurement device for continuous monitoring of contamination and wear in hydraulic fluids and lubricants.
Particle monitors precisely display any change in contamination of a system. Thus you can react quickly with an increase in particle concentration and countermeasures can be taken. Subsequent damages are minimized and costs are reduced.

Compatible fluids:

  • mineral oils (H, HL, HLP, HLPD, HVLP)
  • synthetic esters (HETG, HEPG, HEES, HEPR)
  • polyalkylenglycols (PAG)
  • zinc and ash-free oils (ZAF)
  • polyalphaolefins (PAO)
  • phosphate ester (phosphate ester version)
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
152501-1-1

MP Filtri Particle Counter

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158012-1-1

Digitale gauge

Digital manometer is a simple and accurate tool for measuring the pressure on local facilities. The gauge also shows pressure peaks and max / min values. Available in three different editions: 0-60 bar, 0-250 bar, 0-600 bar.

  • Accuracy: + / - 0.5% F.S., + / - 1 digit.
  • 4 figures, 7 segment LCD display, 11mm high
  • Measurement Unit: MPa, psi and bar
  • IP 65
  • Stainless steel housing.
  • Weight 0.4 kg
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158012-1-2

MINIMESS ® pressure test case with digital pressure gauge.

.

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-6

ISDS Sensors

Robust and million-fold proven sensor, especially for mobile use. With short response time and available for many pressure ranges.

  • Signal:0-20mA
  • Error:+/-2% sensor value
  • Connection:M16 (6pole)
  • Temp:-40…+100oC
  • Response Time:<1ms
  • Signal Type:ISDS
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-7

Gear flow meters

Positive displacement gear flow meter. Covering a broad viscosity range and is available with frequency or analogue output signal.

  • Signal: Freq or 4-20mA analogue
  • Error: +/- 0.5% MV
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-8

Turbine flow meters

Thousand-fold proven measuring turbine, either with analogue or frequency output signal. Bi-directional flow rate measurement is possible, standard calibration viscosity is 30 cSt (mineral oils).

  • Signal: Freq or 4-20mA analogue
  • Error: +/- 0.5% MV
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-9

Sensor Cables

Shielded measuring cables M16 x 0.75 (6 pole) for all Hydrotechnik measuring instruments.

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-5

MultiBox 3060/3061/3065

The data logger: Affordable measuring instrument with 4 measuring channels for connection with a PC via USB or Ethernet or as an independent data logger that can be connected to a network for remote system access depending on model.

  • Analog input channels 3x (for sensors with or without Hydrotechnik ISDS)
  • Signals 0/4 ... 20 mA or 0/2 ... 10 V (due to device version)
  • A/D converter 12 bit
  • Error limits +- 0,1 % FS
  • Switchable input channel 1x (for sensors with or without Hydrotechnik ISDS)
  • Signals 0/4 ... 20 mA or 0/2 ... 10 V (due to device version)/1.0 Hz ... 5 kHz (w.D.) or 1.0 Hz ... 10 kHz (w.o.D.)
  • Error limits +- 0.2 % of measured value
  • Special channels 2x Calculations difference, hydraulic power
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-6

MultiHandy 3020/3025

The service companion: This robust user friendly and portable device has three input channels, a robust aluminium casing and a USB interface that covers the basic demands of mobile measuring data collection in the most reliable way. Calculations can be executed in real time on an additional channel. This allows to determine, display and record ?(x) fast and easy.

  • Analog input channels 2x (for sensors with or without Hydrotechnik ISDS)
  • Signals 0/4 ... 20 mA
  • A/D converter 12 bit
  • Error limits +- 0.2 % FS
  • Frequency input channels 1x (for sensors with or without Hydrotechnik ISDS)
  • Error limits +- 0.2 % of measured value
  • Special channels 1x Calculations difference, sum, 1. derivation, hydraulic power
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-4

MultiSystem 4010

The entry to complexity: the handy mobile measuring system that has 12 channels and can meet the demands of ambitious measuring technicians. With its professional functions it is suited for complex measuring tasks at small and medium-sized systems, but also for the fast measurement anywhere you are.

  • Analog input channels 3x (for sensors with or without Hydrotechnik ISDS)
  • Signals 0/4 ... 20 mA • 0/2 ... 10 V
  • A/D converter 12 bit
  • Error limits +- 0.2 % FS
  • Frequency input channels 1x (for sensors with or without Hydrotechnik ISDS)
  • Signals 0,25 Hz ... 20 kHz (w.o.D.) / 0.25 ... 5 kHz (w.D.)
  • Error limits +- 0.02 % MW
  • Switchable input channels 1x analog / frequency (for sensors with or without Hydrotechnik ISDS)
  • Digital input 1x, separated galvanically
  • Digital output 1x max. load Ub / 10 mA Reaction time = 1 ms
  • Special channels 5x : Calculations difference, sum, hydraulic power, CAN (option) CAN measuring rate 100 values per second CAN protocols CANopen, SAE J1939, ...
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-7

MultiSystem 8050

The High-Tech instrument: For the most demanding of tests and applications, this measuring system is incomparable. All values are displayed clearly on the large touchscreen, either numerically or as line diagram. This adds to the unique flexibility by the variety of inputs and outputs.

  • Everything visible: up to 30 channels on the TFT monitor simultaneously
  • Live analysis of measuring data: huge graphic display for perfect line diagrams
  • High end measuring system: High Speed inputs and various filter functions
  • Universal use: Analogue and digital inputs and outputs, many interfaces
  • Outstanding operational concept: touchscreen monitor and logical menu structure. Can also be connected to a PC for more flexibility.
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-8

Multi EPC 100 and EPC Multi 200 (DESINA version)

Robust pressure switches for industrial use. Available with one or two contact pairs. Programmable with optional setpoints, hysteresis or window function. Available in the following pressure ranges:

  • 0 til 25 bar.
  • 0 til 100 bar
  • 0 til 250 bar
  • 0 til 400 bar
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158001-1-9

SEG 1060

Panel-mounted instrument, available in 24 VDC or 230 VAC version. Measures pressure, temperature, flow, RPM, etc. Possibility to store max and min values.

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-1

Compare Analog and Compare Digital

Both instruments are available in 24 VDC or 230 VAC versions. Compare Analogue is available with one or two analog measuring inputs, 0-20 mA, 4-20 mA or 0-10V. Compare Digital comes with one or two frequency inputs. Both instruments are available with relay output.

Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
158011-1-2

Multi-Panel 8050

Measuring instrument for 19 "rack mounting. With a total of up to 30 inputs, large, clear and easy to read displays, Multi-Panel 8050 ideal for measuring and monitoring of large systems. Available in versions with 8 or 16 displays.

  • 10 analog inputs, 0-20 mA, 4-20 mA, 0-10 V, + / - 10V.
  • 2 analog inputs + / - 2A DC and + / - 48V DC.
  • 4 frequency inputs.
  • 6 or 14 CAN bus inputs.
  • 4 digital inputs.
  • 4 digital outputs.
  • 2 analog outputs.
  • 128 MB RAM, expandable to 1 GB.
Datasheet, pricelist
Click on Logo - Go to directly to the supplier's website
SERVI GROUP
Rasmus Solbergs vei 1
Postboks 3230
1400 Ski

T +47 64 97 97 97
F +47 64 97 98 99
post@servi.no

24/7 Service
T +47 64 97 97 00
Servi AS
BergenT +47 55 10 82 20
CCB-ÅgotnesT +47 934 56 607
KongsbergT +47 48 06 56 56
KristiansandT +47 38 10 22 90
RissaT +47 73 85 05 00
SkiT +47 64 97 97 97
TrondheimT +47 73 80 10 00
Servi Ulsteinvik AS
UlsteinvikT +47 70 31 85 50
ÅlesundT +47 96 91 96 01
 
Servi Hydraulik AB
GøteborgT +46 (0)31 745 00 62

Facebook LinkedIn Youtube